These are the downloads for the "Building the KRMx01 CNC" book, ISBN 978-1-938687-00-6.
Be sure to visit the KRMx01 main information page here:
Download the complete KRMx01 book
Important:
In order to keep the download size to a minimum, the illustration and layout resolutions have been reduced.
I have made the full resolution printed version available on Amazon for a minimal charge.
More Downloads
KRMx01 Z-plate Template
The KRMx01 Z-plate is no longer sold. Here is a printable template so that you can make your own.
Just print the PDF so that the dimensions shown accurate and use it as s template to mark your holes. The Z-plate should be made from 1/2 aluminum 8-7/8" x 5"
This size piece of aluminum can be purchased from online metals.
Other Links
5-Start Nut
The original 5-Sart nut is no longer available at CNCRouterParts. The replacement nut can be found here:
Dumpster ACME Nut Assembly (5-Start)
Note that his new nut requires some modifications to the build. You can find out about them here:
Stand Update
Please note that the Rousseau stand is no longer manufactured. There are alternatives out there but I recomend purchasing two Rockler 24" x 36" stands found here:
Use the two kits to build one 36" x 36" stand and one 24" x 24" stand. You can use the 36" x 36" stand to hold the CNC and the other as a small accessory or tool table.
Note as an option, you can just build two 24" x 36 tables and build the machine on top of them both. Please not that the shelf panels will have to be sized to whatever stand you make.
KRMx01 Upgrade Book
An upgrade book for the KRMx01 is also available from Amazon.