Making Stile and Rails with the KRMx02

I made a fixture to allow me to cut some stiles and rails with the KRMx02 CNC.

Using KRMx02 to Make a Warning Sign

Here I show you my process for making a warning sign for my beehives.

Plasma Cutting new Beehive Frame Spacers

Here I show you how I plasma cut some new frame spacers for my beehives.

Building the FirstWalker

I designed this walker about 17 years ago.

Here I give it new life by cutting the components out of 1/4” plywood.

DIY Bread Lame

Here I show you how I make these bread lames.

Making a Hanging Sign

This is a new write-up of my hanging sign project.

Making a Round Gun Rack

This is a new write up of the Round Gun Rack project I did a while back.

Melting Pewter

Here, I show you my process for melting pewter.

Making a Fixture Sled with your CNC

In this write-up, I show you how I made this fixture sled with my CNC.

My Bee House

My first bee house.

Cutting Large Panels on your KRMx02

This panel was too large to cut on my KRMx02. Here, I will show you how I did it.

Rear Screens and Separators

Here I add the rear frames and separators to the beehives.

Assembling the Slovenian Beehive Panels

Here I show you how I assemble the Slovenian beehive panels.

Making the Slovenian Beehive Panels

While I will be trying other techniques to cut the features into the various panels. In this installment, I will be using my KRMx02 to machine the features.

Building a Slovenian AZ Beehive

Here, I start my Slovenian beehive project