KRMx02 Making a Sign for my Deck

Here I show you how I used my KRMx02 CNC to make a sign for my shooting deck.

KRMx02 Milling Enclosure panels for the Universal PID Temperature Controller

Here I show you how I made the panels for this enclosure using the KRMx02 CNC Router.

Reloading Tray

Here I show you how I made some custom reloading trays.

The write-up is located over on my Bread and Ammo site.

KRMx02 Controller Upgrade

Here I show you how to upgrade your KRMx02 to a UC300ETH controller.

CNC Plant Hanger

Here I use my CNC make some plant hangers. Free drawing files available.

Add an Automatic Cooling Fan to the G540.

If your G540 is running too hot, this upgrade is for you.

Searching for Low Latency

Looking into lowering plasma cutting latency.

Guides for a 3 in 1 Shear, Press, Roller

Some simple guides I made for my press break and shear.

DIY Vacuum Fixture

Here I show you how I made this vacuum fixture.

Inexpensive CNC Pendant

Here I add an inexpensive pendant to my KRMx02.

Plasma Torch Height Control Experiments

Here I hookup, configure, and test various torch height control systems.

CNC Construction Set Homing Switches

Here I show you how to add some homing switches to your CNCCS build.

Using a Drag Knife

See how I attach and setup a drag knife.

Updated 12/1/2019

CNC Construction Set Rotary Plasma Experiment

In this video I do an experiment with my harmonic rotary drive and my CNC Construction Set plasma cutter.

Your First Welder

Looking for your first welder? Here is a little bit of my welder history. Maybe it will help.