This is a set of drawing files I used to make a set of reloading trays.

You can find my writeup here:

Reloading Tray

I have also included a pdf file of both tray 1 and tray 2 with marks for using a drill press.

These files should be able to be used by any CAM software, the two included gcode files should work on most machines, but were setup for soft plastic and a 1/4” end mill. You may have to override the speeds and feeds depending on the stock you use.

Included are the following files:

Loading Tray Holder.ai

Loading Tray Holder.dxf

Loading Tray Holder.eps

tray 1 4x4.ai

tray 1 4x4.dxf

tray 1 4x4.eps

tray 2 38 5x6.ai

tray 2 38 5x6.dxf

tray 2 38 5x6.eps

tray 2 44 5x6.ai

tray 2 44 5x6.dxf

tray 2 44 5x6.eps

Tray 1 marks for drill press.pdf

Tray 2 marks for drill press.pdf

Tray 2 Top.txt

Tray 2 Bottom.txt